3D printer
LulzBot Taz 6 at public library makerspaces
5 US public library makerspaces list a LulzBot Taz 6 on their own pages, in 5 states. Below: what the maker says it does, what the libraries' pages say about using it, and where to find one.
What it is
The LulzBot TAZ 6 is a large, open-frame desktop 3D printer that melts plastic filament and builds objects layer by layer. People use it to make prototypes, replacement parts, tools, and large models.
- First sold
- 2016 fabbaloo.com
- Build volume
- 280 x 280 x 250 mm (11 x 11 x 9.8 in) lulzbot.com
- Print technology
- FDM (filament) lulzbot.com
- Materials
- Open filament format; all-metal hot end rated to 290°C lulzbot.com
- Print surface
- Heated PEI print surface lulzbot.com
- Price
- $2,500 (launch list price; discontinued) 3dprintingindustry.com
Facts from the maker and the pages linked, checked on October 25, 2026. The maker's page.
What the libraries' pages say
Training and fee lines that library pages tie to their LulzBot Taz 6, in their own words, from our machines report. Rules change, so check the library's page before you go.
- Bloomingdale Public Library, ILRead it on the library's site
Fee: Filament - 5¢/gram
- Huntington Memorial Library, Oneonta, NYRead it on the library's site
Fee: a small fee
- Medina County District Library, OHRead it on the library's site
Fee: 10 cents per gram
Where to find one
Every library location on the map that lists a LulzBot Taz 6, by state. Each links to the library's own makerspace page.
California (1)
- The Makery, Vallejo
Illinois (1)
- BPL Makerspace, Bloomingdale
Nebraska (1)
- Creation Station, North Platte
New York (1)
- Huntington Memorial Library, Oneonta
Ohio (1)
- Medina County District Library, Medina
Other 3D printers at library makerspaces
All machines at library makerspaces · Spot something wrong? Send a correction.