3D printer
Bambu Lab P1S at public library makerspaces
20 US public library makerspaces list a Bambu Lab P1S on their own pages, in 15 states. Below: what the maker says it does, what the libraries' pages say about using it, and where to find one.
What it is
The Bambu Lab P1S is a fully enclosed desktop 3D printer that melts plastic filament and builds objects layer by layer. People make prototypes, replacement parts, tools, organizers, and small gifts with it.
- First sold
- 2023 all3dp.com
- Build volume
- 256 x 256 x 256 mm us.store.bambulab.com
- Print technology
- FDM (filament) digitec.ch
- Enclosure
- Fully enclosed chamber us.store.bambulab.com
- Materials
- PLA, PETG, ABS, ASA, TPU, PVA welectron.com
- Max hotend temperature
- 300 °C us.store.bambulab.com
- Rating
- 4.9 out of 5, 54 reviews on 3DJake (P1S Combo) 3djake.com
Facts from the maker and the pages linked, checked on October 25, 2026. The maker's page.
What the libraries' pages say
Training and fee lines that library pages tie to their Bambu Lab P1S, in their own words, from our machines report. Rules change, so check the library's page before you go.
- Bentonville Public Library, ARRead it on the library's site
Training: All patrons must go through Intro to 3D Printing before they are permitted to use the 3D printers
Fee: $0.10 / gram
- Downey City Library, CARead it on the library's site
Training: Due to their complexity and for safety reasons, currently only trained Workshop staff can operate the printers
Fee: Our PLA 3D printing service is 100% free
- Bloomingdale Public Library, ILRead it on the library's site
Fee: Filament - 5¢/gram
- Council Bluffs Public Library, IARead it on the library's site
Fee: Filament 3D Printing $0.10/Gram (maximum print time of six hours)
- Hussey-Mayfield Memorial Public Library, Zionsville, INRead it on the library's site
Fee: $0.05 per gram of filament. Max 4 hours
- Lagrange Memorial Library, GARead it on the library's site
Fee: $0.20 per gram
- Topeka And Shawnee County Public Library, KSRead it on the library's site
Fee: $2 charge per 3D print session
- Westport Library, CTRead it on the library's site
Training: This is a mandatory two-hour training that all MakerSpace patrons must take to be certified in using our 3D printers
- Weymouth Public Libraries, MARead it on the library's site
Training: Safety Training and a 3D Printer Overview with library staff
Where to find one
Every library location on the map that lists a Bambu Lab P1S, by state. Each links to the library's own makerspace page.
Arkansas (1)
- BPL Makerspace, Bentonville · 2 of them
California (2)
- Fab Lab, Altadena
- The Workshop, Downey
Connecticut (3)
- Cossitt Creation Station, Granby · 2 of them
- Anderson MakerLab, New Canaan
- Westport Library, Westport
Georgia (1)
- Creation Station, Lagrange
Illinois (2)
- Innovation Lab, Bloomington
- Maker Lab, Chicago
Indiana (1)
- MakerStudio, Zionsville
Iowa (1)
- Council Bluffs Public Library, Council Bluffs
Kansas (1)
- Level 2 Tech Center, Topeka
Massachusetts (1)
- Waltham Public Library, Waltham
Michigan (1)
- Vernon District Public Library, Vernon
Nebraska (1)
- Fullerton Public Library, Fullerton
New York (1)
- The Libratory, Goshen
Ohio (2)
- Porter Public Library, Westlake
- Creation Station, Wooster
Pennsylvania (1)
- Henrietta Hankin Branch Library, Chester Springs
Texas (1)
- Mammen Family Public Library, Bulverde
Other 3D printers at library makerspaces
All machines at library makerspaces · Spot something wrong? Send a correction.