3D printer
Prusa MK3S+ at public library makerspaces
12 US public library makerspaces list a Prusa MK3S+ on their own pages, in 10 states. Below: what the maker says it does, what the libraries' pages say about using it, and where to find one.
What it is
The Original Prusa MK3S+ is a desktop 3D printer that builds objects by melting plastic filament and laying it down layer by layer. People make useful parts, tools, prototypes, and models with it, and Prusa stopped selling the kit in 2024 but still supports it.
- First sold
- 2020 fabbaloo.com
- Build volume
- 250 x 210 x 210 mm wevolver.com
- Print technology
- FDM (melted filament), 0.4 mm nozzle wevolver.com
- Materials
- PLA, PETG, ASA, ABS, PC, nylon wevolver.com
- Enclosed or open
- Open frame (enclosure sold separately) wevolver.com
Facts from the maker and the pages linked, checked on October 25, 2026. The maker's page.
What the libraries' pages say
Training and fee lines that library pages tie to their Prusa MK3S+, in their own words, from our machines report. Rules change, so check the library's page before you go.
- Boynton Beach City Library, FLRead it on the library's site
Fee: $0.10 cents per gram
- Copiague Memorial Public Library, NYRead it on the library's site
Fee: The charge is $0.25 per 15 minutes of print time
- Missoula Public Library, MTRead it on the library's site
Fee: 5 cents per gram of plastic
- Pasadena Public Library, TXRead it on the library's site
Training: Patrons must earn the 3D printer orientation/machine badge through the PPL Beanstack Challenge before requesting an appointment
Fee: 10¢ per gram for regular filaments and 20¢ per gram for special filament
- Somerset County Library, Princess Anne, MDRead it on the library's site
Fee: $1.00 per hour plus $0.10 per gram for most filament
- Teton County Library, Jackson, WYRead it on the library's site
Training: Training is required prior to using 3D printers and laser cutter
- Warren-Trumbull County Public Library, OHRead it on the library's site
Fee: $0.25 per 15 minutes of printing, with a maximum print time of 10 hours per print
Where to find one
Every library location on the map that lists a Prusa MK3S+, by state. Each links to the library's own makerspace page.
Colorado (1)
- Security Public Library, Security
Florida (1)
- Creative Edge Studio, Boynton Beach
Illinois (2)
- Creative Studio, Byron · 2 of them
- 309 Creative, Dekalb
Maryland (2)
- Crisfield Branch, Crisfield
- Somerset County Library, Princess Anne
New Hampshire (1)
- Meredith Public Library, Meredith
New York (1)
- Copiague Memorial Public Library, Copiague
Ohio (1)
- Maker Studio, Warren
Oklahoma (1)
- Seminole Public Library, Seminole · 4 of them
Other 3D printers at library makerspaces
All machines at library makerspaces · Spot something wrong? Send a correction.