3D printer
Prusa MK3S at public library makerspaces
6 US public library makerspaces list a Prusa MK3S on their own pages, in 6 states. Below: what the maker says it does, what the libraries' pages say about using it, and where to find one.
What it is
The Original Prusa MK3S+ is an open-frame desktop 3D printer that builds objects by melting plastic filament and laying it down layer by layer. People use it to print prototypes, replacement parts, tools, and models.
- First sold
- 2019 blog.prusa3d.com
- Build volume
- 250 x 210 x 210 mm wevolver.com
- Materials
- Any thermoplastic, incl. PLA, PETG, ABS, ASA, Nylon, PC wevolver.com
- Filament
- 1.75 mm, direct-drive extruder, 0.4 mm nozzle wevolver.com
Facts from the maker and the pages linked, checked on October 25, 2026. The maker's page.
What the libraries' pages say
Training and fee lines that library pages tie to their Prusa MK3S, in their own words, from our machines report. Rules change, so check the library's page before you go.
- Longwood Public Library, Middle Island, NYRead it on the library's site
Fee: $1.00 per hour or $0.50 per 30 minutes
Where to find one
Every library location on the map that lists a Prusa MK3S, by state. Each links to the library's own makerspace page.
California (1)
- The LearningLAB, Long Beach
Florida (1)
- Creative Lab, Cocoa
Kansas (1)
- Salina Public Library, Salina
Maryland (1)
- Caroline Central Library, Denton
New Hampshire (1)
- Kingsbury Makerspace, Keene
Other 3D printers at library makerspaces
All machines at library makerspaces · Spot something wrong? Send a correction.