Letters A to Z, a to z and 0 to 9. Capitals make the chunkiest pieces.
Letter heightmm
How tall a capital letter is; small letters follow.
4 pieces · board and backer · 1 sheet of 495 × 279 mm
Tool updated: Nov 20, 2026, 1:00 PM ET
Have a code?
Works with LightBurn, Glowforge, xTool & more
CutEngrave
Drag to pan · Scroll to zoom · Double-click to reset
281 × 86 mm

Don't have a laser cutter?

No problem: there's likely a public-library makerspace near you with a laser cutter. Many let you use the machines free with a library card; you just pay for materials.

Screenshot of the makerspace map: gold hexagon clusters of library branches across the US, one open to show a branch's equipment

Click the map to open it. Hexagon clusters are real library branches; open one to see its machines.

See which models libraries have

Free Name Puzzle Maker

Type a child's name and download one laser file for a wooden puzzle: every letter is a chunky piece that drops into its own hole. No sign-up, no account.

About the Name Puzzle

A name puzzle is the classic first gift for a new reader: their own name in big wooden letters, each one a piece to lift out and put back. This tool makes the laser file for one in a few seconds. The letters are a chunky rounded face, cut straight out of a board so each piece matches its hole, and if you like, a small copy of every letter engraved on the backer underneath as a hint. Set the letter height, add a second line for a last name, and download one SVG, or one per sheet sized to your laser bed.

Made for first-time makers: two parts, one kind of wood, one glue step, and no loose bits to place. The 3D view shows the finished puzzle and lifts the letters out of their holes.

What you need

One sheet of 1/8 in (3 mm) plywood big enough for the board and its backer (the sidebar shows the size), a laser cutter, wood glue, and fine sandpaper. Most public-library makerspaces have a laser you can use free with a library card.

How to build it

  1. Cut the file. Blue is the engrave layer (the maker's mark, and the hints if you turned them on), red is the cut layer. Set the engrave to run first, then the cuts, so the engraving lands before any part comes loose.
  2. Pop the letters out. Push every letter out of the top board and set them aside. They are the puzzle pieces.
  3. Throw away the small inner bits. Inside an A, an O or a 4, a small island of board falls out too. That is scrap.
  4. Glue the board onto the backer. Spread a thin layer of wood glue on the backer and lay the top board on it with the edges flush. If you engraved hints, they face up and sit in the middle of their holes. Clamp or weigh it down until dry.
  5. Sand and finish. Round the pieces' edges with fine sandpaper. Paint the pieces in bright colours, or leave the wood plain and seal it with a child-safe finish.

Frequently Asked Questions

What do I get?

One SVG with two parts: the top board, a rounded rectangle with the letters cut out of it, and the backer, the same rectangle left solid. The cut-outs are the puzzle pieces. Glue the board onto the backer with the edges flush and the puzzle is done.

How do the pieces fit their holes?

Each piece and its hole come from the same cut line, so they always match. The laser's own kerf, the sliver of wood the beam burns away, is the play between them: a piece drops in and lifts out without catching. There is no kerf setting to get right.

What wood and thickness?

1/8 in (3 mm) plywood for both parts is the easy choice: thin enough for any school laser to cut, and the pieces are still chunky enough for small hands. For thicker pieces cut the top board from 1/4 in (6 mm) plywood and keep the backer at 1/8 in. The file is the same whatever the thickness.

What are the hints?

An option under Advanced: a small copy of each letter, engraved on the backer in the middle of its hole. When a piece is out, the child sees which one goes back. Off by default, so the plain puzzle is a little harder.

Why are the inside bits of the A and the O loose?

A letter keeps its real holes, so the A and the O look like letters. The small island that falls out of the board inside such a letter is scrap: throw it away. Nothing has to be glued back in place.

Is this safe for a toddler?

Keep it for children over 3. Small pieces can be a choking hazard: when any letter at your chosen size would fit the US small-parts test cylinder, the tool shows a note by the Letter height slider. Bigger letters mean bigger pieces. Sand the edges and use a child-safe finish.

Can I use accents or a hyphen?

Not yet. This first version cuts A to Z, a to z and 0 to 9, and tells you under the name when it has skipped a character. Accented letters are the first thing on the list for a later version.

Do I need to create an account?

No. The Name Puzzle is browser-based and free. No sign-up and no account. Designer Bee keeps only anonymous usage stats, like how many letters a puzzle has, never the name.