Laser cutter
Epilog Helix at public library makerspaces
5 US public library makerspaces list a Epilog Helix on their own pages, in 3 states. Below: what the maker says it does, what the libraries' pages say about using it, and where to find one.
What it is
The Epilog Helix 24 is a discontinued desktop CO2 laser that cuts and engraves with a focused beam of light. People use it to make engraved wood and acrylic signs, cut paper and fabric shapes, and personalized gifts.
- Laser type and power
- CO2, 30 to 80 W options support.epiloglaser.com
- Work area
- 24 x 18 in (610 x 457 mm) support.epiloglaser.com
- Max material thickness
- 8.5 in (216 mm), 11 in with table removed support.epiloglaser.com
- Exhaust requirement
- External exhaust, 350 to 400 CFM support.epiloglaser.com
Facts from the maker and the pages linked, checked on October 25, 2026. The maker's page.
What the libraries' pages say
Training and fee lines that library pages tie to their Epilog Helix, in their own words, from our machines report. Rules change, so check the library's page before you go.
- Medina County District Library, OHRead it on the library's site
Training: Members must meet with a staff member before they are cleared to use the Laser Engraver, Sewing Machine, Serger, or Embroidery Machine
Where to find one
Every library location on the map that lists a Epilog Helix, by state. Each links to the library's own makerspace page.
Nebraska (3)
- Norfolk Public Library, Norfolk
- Plainview Public Library, Plainview
- Lied Scottsbluff Public Library, Scottsbluff
New York (1)
- Tompkins County Public Library, Ithaca
Ohio (1)
- Medina County District Library, Medina
Other laser cutters at library makerspaces
All machines at library makerspaces · Spot something wrong? Send a correction.